Tagged: firewall
This topic contains 7 replies, has 3 voices, and was last updated by 
- AuthorPosts
- September 27, 2010 at 5:27 pm #1388
I am using windows firewall on my pc’s.. Have some computers that are not on our domain but have the same workgoup.
When I try to scan that pc with the firewall off it scans the computer no problem. With firewall on I get this error…
A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond. Last snapshot used.Please Help
ThanksSeptember 28, 2010 at 6:52 am #2368So this means that Windows Firewall blocks the connection from the scanning PC. You should configure the firewall, there’s not much we can do to bypass it.
September 28, 2010 at 8:39 am #2291How do I configure the firewall. I am not sure what ports need to be open.
September 28, 2010 at 9:06 am #2292Okay I found on this site that these ports need to be open on the firewall.
Thanks all is working really good now.tcp 22 in
udp 137 in
tcp 139 in
udp 138 in
tcp 135 in
tcp 1051 inSeptember 28, 2010 at 1:17 pm #2293Thanks for letting us know that all is well now. Windows Firewall can be very tricky in configuration.
April 21, 2011 at 1:46 pm #1863
AnonymousIs this a complete list?
I did the same but after turning the the FW back on with these exceptions I can not scan a machine.
Thank you.April 22, 2011 at 4:46 am #1864Which status is returned from this node?
April 22, 2011 at 12:22 pm #1865
AnonymousHi Jeff,
The same as mastrond’s
A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond. Last snapshot used.
I understand I am not a customer yet but I would like to have this working in demo before the purchase. Let me know if extending your support this far is an issue.
Thank you. - AuthorPosts
You must be logged in to reply to this topic.